How to purchase solid wood office furniture?
1. Observe the wood: Open the cabinet door and drawer to observe whether the wood is dry and white, whether the texture is tight and delicate, to prevent furniture made by adding chipboard, MDF and one-time molding board, etc., to see if the solid wood pattern is consistent and smell Irritating smell.
2. Identify raw materials: This is a factor that directly affects price and quality. Ordinary solid wood furniture usually uses beech, white oak, ash, elm, catalpa, rubber wood, oak wood. At the same time, it should be noted that the price of wood is now rising, and it is absolutely cheap to cheat.
3. Observe the details: pay attention to see if the product has shrinkage joints. The joints of real solid wood flip drawers and other joints generally use a tenon structure. The fake solid wood adopts the "hollow-out" method. The solid wood office furniture cabinets, drawer handles, etc. are unobstructed and hollowed out.
How to distinguish solid wood office furniture sheet
The middle of the blockboard is a core made of natural wood, with thin veneer glued on both sides. It is one of the most commonly used materials in solid wood office furniture. When selecting, look at its internal wood, it should not be too shattered, and the blockboard with a gap of about 3mm between the wood is suitable. Because the wood grain exposed on the surface is not beautiful, it is rarely painted directly, and usually veneer plywood is applied. The deformation of the plate is small, the nail holding force is relatively good, and the price is high.
2. MDF and particle board:
Particleboard is natural wood crushed into granules and pressed into boards. It is currently the main material for office furniture. MDF is formed by pressing powdery wood chips after pressing. It has good flatness and poor moisture resistance. The density of the MDF is worse than that of the particle board. If the screws are loose after tightening, the density of the MDF is not high and it is difficult to fix it. Therefore, it is rarely used for cabinets such as file cabinets that need to support gravity.
3. Integrated board:
The emerging solid wood material is made of high-quality imported large-diameter logs. It is staggered like fingers and has excellent environmental performance. It is 1/8 of the formaldehyde content of blockboard. It can be directly painted and painted. The wood board saves one process and is not easily deformed.